Item |
Description |
Quantity |
Unit |
Rate(Tk) |
Amount(Tk) |
01 |
125 mm thick ordinary brick work (1:4) including supplying and carrying coarse sand, 1st class bricks, sorting and soaking of bricks (Min 24 hours with fresh water), curing (Minimum 10 days) all complete as per drawing and direction of the Engineer-In-Charge. |
40.00 |
M2 |
410.00 |
16,400.00 |
02 |
250 mm or more thick ordinary brick work (1:5) including supplying of coarse sand, bricks, sorting and soaking of bricks (minimum 24 hours with fresh water), curing for min 10 days all complete as per direction of the EIC . |
52.00 |
M3 |
3000.00 |
156,000.00 |
03 |
Average 20 mm thick cement plaster (1:6) to wall maintaining sharp angle at corners, joints, kobla etc. with steel trowel finish including supplying of best quality coarse sand, screening, curing for minimum 10 days all complete as per dorection of the E.I.C. |
1050.00 |
M2 |
120.00 |
126,000.00 |
04 |
Minimum 8 mm thick cement plaster (1:4) to all R.c.c surface such as ceiling, coloum, beam, lintel etc maintaining sharp angle at corners, joints, kobla etc. with steel trowel finish including supplying of best quality coarse sand, screening, curing for minimum 10 days all complete as per dorection of the E.I.C. |
650.00 |
M2 |
105.00 |
68,250.00 |
05A |
Reinforced cement concrete work(1:1.5:3) in all R.c.c works having minimum crushing strength 25 Mpa (cylinder) at 28 days with Holcim Cement, 20mm down graded stone chips, sand (F.M.not less than 2.5 ) including washing, breaking of chips, screening of sand, mixing, laying, compacting, maintaining levels, curing for minimum 28 days etc. all complete as per direction of the EIC.
Column |
11.00 |
M3 |
7200.00 |
79,200.00 |
05B |
Floor Beam and Lintel |
21.00 |
M3 |
7550.00 |
158,550.00 |
05C |
Parapet Wall Excluding design |
6.00 |
M3 |
8500.00 |
51,000.00 |
05D |
RCC Drain |
22.00 |
M3 |
8500.00 |
187,000.00 |
05E |
Stair With Landing |
14.00 |
M3 |
7500.00 |
105,000.00 |
05F |
b) Floor Slab, False Slab |
35.00 |
M3 |
7350.00 |
257,250.00 |
06 |
Supplying and fabrication of deformed bar of Grade 60 with minimum Fy=415 Mpa of different sizes and length in all R.C.C works including straightening, cutting, bending, binding, making of chairs and placing of spacers with supply of G.I wire(22 BWG) and welding, placing in positing where specific, hooking, cranking. lapping etc. all complete as per drawing, specification and direction of the Engineer M.S. Road (fy=415 Mpa) |
11.00 |
TON |
50862.00 |
559,482.00 |
07 |
Plastic painting of best quality & approved colour to wall and other places when necessary two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC. |
280.00 |
M2 |
120.00 |
33,600.00 |
08 |
Weather coat painting of best quality & approved colour to outside walls and other places where necessary over a coat of primer after cleaning, sand papering the surface as per manufacturer,s specification all complete as per direction of the EIC. |
500.00 |
M2 |
110.00 |
55,000.00 |
09 |
Epoxy painting (berger or equivalent) of best quality and approved colour to wall two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC.(including supply of all materials) |
450.00 |
M2 |
325.00 |
146,250.00 |
10 |
Epoxy painting (berger or equivalent) of best quality and approved colour to floor two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC. (including supply of all materials)
|
270.00 |
M2 |
300.00 |
81,000.00 |
11 |
Supplying , fitting and fixing homogeneous non-slip floor tiles( local made) including nosing of approved size and sample in stair where necessary with 20 mm thick cement sand mortar (1:3) all complete including skirting as per direction of the EIC. |
50.00 |
M2 |
900.00 |
45,000.00 |
12 |
Supplying , fitting and fixing of Aluminium sliding / fixed window as per U.S AAMA standard specification having 1.2 mm thick outer bottom , top and sides (size 45 mm , 45 mm) all aluminum members of pre approved manufacturer of anodized silver colour including all accessories , supplying and fitting 5 mm thick white clear glass with neoprene , sealent all complete as per direction of the EIC. |
12.00 |
M2 |
2200.00 |
26,400.00 |
13A |
Supplying , fitting and fixing of Aluminium swing doors with fixed partition as per U.S AAMA standard specification having 1.8 mm thick wall frame (size 101.6mm , 40 mm )1.8 mm thick shutter sides (size 50 mm , 40 mm ) , 0.49 mm thick door glass bit (size 16.54 mm , 14.49 mm ) , 2.5 mm thick closure section (size 101.6 mm , 40 mm) 2.3 mm to 4 mm thick handle (size 101.6 mm , 38.1 mm ) sections all aluminium members of pre approved manufacturer of powder coated white colour including all accessories , supplying and fitting 5 mm thick w
hite clear glass with neoprene , sealent all complete as per direction of the EIC.
Half plastic panel + half clear glass |
8.00 |
M2 |
5300.00 |
42,400.00 |
13B |
Half louver + half clear glass |
8.00 |
M2 |
5500.00 |
44,000.00 |
14 |
Supplying , making , fitting and fixing of M.S door including mortice lock, door handle, painting all complete as per approved sample and direction of the EIC. |
2.50 |
M2 |
4600.00 |
11,500.00 |
15A |
Construction of following sizes inspection pit with 150 mm thick R.C.C (1:2:4) wall , floor and top slab using 20 mm down graded stone chips including earth cutting , back filling , heavy duty grating at top slab , patent stone with neat cement finish (1:2:4) soling , polythene sheet laying on top of soling , shoring and watering if necessary etc . all complete as per drawing and direction of the EIC .
"A" Type (In-In 500 x 500) |
5.00 |
NO |
5925.00 |
29,625.00 |
15B |
"B" Type (In-In 750 x 750) |
2.00 |
NO |
8355.00 |
16,710.00 |
16 |
150 mm dia R.C.C pipe line with proper slope and joint around the pipe including brick soling , earth cutting and back filling etc all complete as per direction of the EIC. |
22.00 |
RM |
375.00 |
8,250.00 |
17 |
Manufacturing , supplying , fitting and fixing stair railing at standard height (1 meter) with 25 mm dia M.S pipe (1 no in each tread) providing 40 mm dia S.S hand rail at top and bottom , vertical pipe will be fixed with the tread by S.S base plate and nut-bolt , base plate will be covered by cover plate (S.S) including polishing , grinding , buffling all complete as per approved drawing and direction of the EIC. Exposed area of railing will be considered for measurement. |
16.00 |
M2 |
2750.00 |
44,000.00 |
18 |
|
80.00 |
RM |
440.00 |
35,200.00 |
19 |
Supplying , fitting and fixing avg. 25 mm thick concrete tiles with the lime mortar including taking all preparation such as cleaning ,chipping, curing all complete as per direction of the EIC. |
140.00 |
M2 |
560.00 |
78,400.00 |
20 |
Supplying , fitting and fixing of rain water S.S gratings on the top of rain water down pipe including making holes in walls and floors and mending good the damages etc all complete as per approved sample and direction of the EIC. |
3.00 |
NO. |
300.00 |
900.00 |
|
|
|
|
Total: |
2,462,367.00 |