| Item |
Description |
Quantity |
Unit |
Rate(Tk) |
Amount(Tk) |
| 01 |
Dismantle and removal of ground floor door and windows with frames , clamps embeded in brick walls , ensuring no breakage of glass and minimal damage to wooden frames . Dismant
ling to be done with appropriate scaffolding. Adequate covering and protection to be provided against weather conditions and insects, required contineously until completion of door and window replacement. Removal of rubbish to assigned dump, cleanup of the work area, as per instruction of EIC.
|
16.00 |
M2 |
70.00 |
1,120.00 |
| 02 |
|
2.00 |
M3 |
1280.00 |
2,560.00 |
| 03 |
Dismatling Brck Wall - 125mm Thick
|
15.00 |
M2 |
55.00 |
825.00 |
| 04 |
125 mm thick ordinary brick work (1:4) including supplying and carrying of bricks, sorting and soaking of bricks (Min 24 hours), curing (Minimum 10 days). Bricks to be soaked for 24 hours in two stages of 12 hours. Fresh water to be used for each stage of soaking. All complete as per drawing and direction of the Engineer-In-Charge. |
35.00 |
M2 |
400.00 |
14,000.00 |
| 05 |
Minimum 12mm thick cement plaster (1:6) to wall maintaining sharp angle at corners, joints, kobla etc. with steel trowel finish including supplying of all materials, sand screening, curing for minimum 10 days. All complete as per direction of the EIC. |
70.00 |
M2 |
100.00 |
7,000.00 |
| 06 |
Plastic painting of best quality & approved colour to wall and other places when necessary two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC. |
110.00 |
M2 |
90.00 |
9,900.00 |
| 07 |
Epoxy painting (berger or equivalent) of best quality and approved colour to wall two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC.(including supply of all materials) |
220.00 |
M2 |
270.00 |
59,400.00 |
| 08 |
Epoxy painting (berger or equivalent) of best quality and approved colour to floor two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC. (including supply of all materials)
|
110.00 |
M2 |
300.00 |
33,000.00 |
| 09 |
Industrial enamel painting of best quality and approved colour over the surface of f
acial , gutter , angle etc . two coats over a coat of primer including cleaning, sand papering the s
urface all complete as per direction of the EIC.(including supply of all materials)
|
32.00 |
M2 |
100.00 |
3,200.00 |
| 10 |
Supplying , fitting and fixing of Aluminium swing doors with fixed partition as per U.S AAMA standard specification having 1.8 mm thick wall frame (size 101.6mm , 40 mm )1.8 mm thick shutter sides (size 50 mm , 40 mm ) , 0.49 mm thick door glass bit (size 16.54 mm , 14.49 mm ) , 2.5 mm thick closure section (size 101.6 mm , 40 mm) 2.3 mm to 4 mm thick handle (size 101.6 mm , 38.1 mm ) sections all aluminium members of pre approved manufacturer of powder coated white colour including all accessories , supplying and fitting 5 mm thick w
hite clear glass with neoprene , sealent all complete as per direction of the EIC.
Half plastic panel + half clear glass |
10.00 |
M2 |
6200.00 |
62,000.00 |
| 11 |
Supplying , fitting and fixing of Aluminium fixed window having 1.5 mm thick outer bottom , top and sides (size 88.90 mm ) with 5 mm clear glass as per direction of the EIC. |
4.00 |
M2 |
2475.00 |
9,900.00 |
| 12 |
Supplying , fitting and fixing of Aluminium louver as per U.S AAMA standard specification having 1.2 mm thick outer bottom , top and sides (size 45 mm , 45 mm) all aluminum members of pre approved manufacturer of anodized silver colour including all accessories , supplying and fitting 5 mm thick white clear glass with neoprene , sealent all complete as per direction of the EIC.
|
4.00 |
M2 |
4100.00 |
16,400.00 |
| 13 |
|
1.00 |
M3 |
10050.00 |
10,050.00 |
| 14 |
|
2.00 |
M3 |
7700.00 |
15,400.00 |
| 15 |
|
13.00 |
RM |
1000.00 |
13,000.00 |
| 16A |
200x50mm wall punch |
0.00 |
NO. |
150.00 |
0.00 |
| 16B |
300x100mm wall punch |
0.00 |
NO. |
250.00 |
0.00 |
| 16C |
300x150mm wall punch |
0.00 |
NO. |
300.00 |
0.00 |
| 16D |
MS Sheet fitting at Louver side MS Door(LTDR) |
0.00 |
M2 |
500.00 |
0.00 |
|
|
|
|
Total: |
257,755.00 |
