| Item |
Description |
Quantity |
Unit |
Rate(Tk) |
Amount(Tk) |
| 01 |
Dismantling of existing window & false ceiling including glass with clamps embeded in brick walls ensuring no breakage of glass and minimal damage to wooden frames. dismantling to be done from inside the building requiring appropriate scaffolding. Adequate covering and protection to be provided against weather conditions and insects, required continously until completion of window replacement. removal of rubbish to assigned dump, cleanup of the work area, as per instruction of the Engineer-In- Charge. |
24.00 |
M2 |
50.00 |
1,200.00 |
| 02 |
125 mm thick ordinary brick work (1:4) including supplying and carrying of bricks, sorting and soaking of bricks (Min 24 hours), curing (Minimum 10 days). Bricks to be soaked for 24 hours in two stages of 12 hours. Fresh water to be used for each stage of soaking. All complete as per drawing and direction of the Engineer-In-Charge. |
6.00 |
M2 |
386.00 |
2,316.00 |
| 03 |
Minimum 12mm thick cement plaster (1:6) to wall maintaining sharp angle at corners, joints, kobla etc. with steel trowel finish including supplying of all materials, sand screening, curing for minimum 10 days. All complete as per direction of the EIC. |
12.00 |
M2 |
90.00 |
1,080.00 |
| 04 |
Plastic painting of best quality & approved colour to wall and other places when necessary two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC. |
28.00 |
M2 |
90.00 |
2,520.00 |
| 05 |
Weather coat painting of best quality & approved colour to outside walls and other places where necessary over a coat of primer after cleaning, sand papering the surface as per manufacturer,s specification all complete as per direction of the EIC. |
15.00 |
M2 |
90.00 |
1,350.00 |
| 06 |
Supplying , fitting and fixing of Aluminium swing doors with fixed partition as per U.S AAMA standard specification having 1.8 mm thick wall frame (size 101.6mm , 40 mm )1.8 mm thick shutter sides (size 50 mm , 40 mm ) , 0.49 mm thick door glass bit (size 16.54 mm , 14.49 mm ) , 2.5 mm thick closure section (size 101.6 mm , 40 mm) 2.3 mm to 4 mm thick handle (size 101.6 mm , 38.1 mm ) sections all aluminium members of pre approved manufacturer of powder coated white colour including all accessories , supplying and fitting 5 mm thick w
hite clear glass with neoprene , sealent all complete as per direction of the EIC.
Half plastic panel + half clear glass |
2.60 |
M2 |
4500.00 |
11,700.00 |
| 07 |
Supplying , fitting and fixing of 10mm suspended plastic panel ceiling which will be fixed by screw with a milk white PVC membrane of anodized aluminium T-bar frame at 600 x 1200mm in grid from ceiling by 12 SWG double ply wire fixed to the ceiling all complete as per direction of the EIC. |
12.00 |
M2 |
1800.00 |
21,600.00 |
| 08 |
Supplying , fitting and fixing of Aluminium fixed window having 1.5 mm thick outer bottom , top and sides (size 88.90 mm ) with 5 mm clear glass as per direction of the EIC. |
5.00 |
M2 |
2200.00 |
11,000.00 |
| 09A |
A/C Ceiling Punch - 75mm dia |
0.00 |
NO. |
250.00 |
0.00 |
| 09B |
PVC Pipe 150D-L-150,25D-L-150 |
0.00 |
NO. |
500.00 |
0.00 |
|
|
|
|
Total: |
52,766.00 |
