BOQ (Press Item for Analysis)

BOQ for Prayer Room in between BIL & PTK
Item Description Quantity Unit Rate(Tk) Amount(Tk)
01
CC Ramp Dismatling
48.00
M2
100.00
4,800.00
02
Earth work in excavation of foundation trenches of any dimension upto required depth including removal of soil to a required distance within the site with necessary shoring and bailing out of water, if necessary as per drawing and instruction of the EIC.
16.00
M3
86.00
1,376.00
03
75 mm thick cement concrete (1:2:4) in foundation, floor or where necessary using water proofing admixture pudlo or approved equivalent @ 1 kg per bag of cement including supply of Holcim cement, best quality coarse sand and 20mm down graded stone chips in /c breaking chips, screening , mixing , laying , compacting , washing of sand and curing at
2.00
M3
3200.00
6,400.00
04
Supplying and laying of filling sand having minimum F.M. 0.80 over the compacted earth surface in 150mm layers including leveling watering consolidating each layer upto finished level as per Direction of the EIC.
15.00
M3
390.00
5,850.00
05
Supplying and laying of double layer polythene sheet weighing one kilogram per 6.5 square metre in footing below brick flat soling and other places where necessary. All complete as per direction of the EIC.
76.00
M2
29.00
2,204.00
06
Single layer (3") 1st class ordinary brick flat soling in floor and other places where necessary including sorting and soaking of bricks, Levelling, laying & filling the intertstices with sand as per direction of EIC.
48.00
M2
140.00
6,720.00
06A
Excluding supplying of bricks (with existing brick ).
0.00
M2
32.00
0.00
07
50mm thick cement concrete damp proof course (1:1.5:3) in cement concrete with cement, sand (F.M. 1.2), stone chips including breaking chips, screening, mixing, casting, curing and inished etc. ail complete as per drawing, specification and direction of the Engineer.
9.00
M2
240.00
2,160.00
08
82.00
M2
30.00
2,460.00
09
250 mm or more thick ordinary brick work (1:5) including supplying of coarse sand, bricks, sorting and soaking of bricks (minimum 24 hours with fresh water), curing for min 10 days all complete as per direction of the EIC .
11.00
M3
2585.00
28,435.00
10
125 mm thick ordinary brick work (1:4) including supplying and carrying coarse sand, 1st class bricks, sorting and soaking of bricks (Min 24 hours with fresh water), curing (Minimum 10 days) all complete as per drawing and direction of the Engineer-In-Charge.
88.00
M2
360.00
31,680.00
11
Minimum 12mm thick cement plaster (1:6) to wall maintaining sharp angle at corners, joints, kobla etc. with steel trowel finish including supplying of all materials, sand screening, curing for minimum 10 days. All complete as per direction of the EIC.
258.00
M2
86.00
22,188.00
12
3.00
M3
4500.00
13,500.00
13
Supplying and fabrication of deformed bar of Grade 60 with minimum Fy=415 Mpa of different sizes and length in all R.C.C works including straightening, cutting, bending, binding, making of chairs and placing of spacers with supply of G.I wire(22 BWG) and welding, placing in positing where specific, hooking, cranking. lapping etc. all complete as per drawing, specification and direction of the Engineer M.S. Road (fy=415 Mpa)
0.30
TON
29000.00
8,700.00
14
Weather coat painting of best quality & approved colour to outside walls and other places where necessary over a coat of primer after cleaning, sand papering the surface as per manufacturer,s specification all complete as per direction of the EIC.
130.00
M2
100.00
13,000.00
15
Plastic painting of best quality & approved colour to wall and other places when necessary two coats over a coat of primer including cleaning, sand papering the surface all complete as per direction of the EIC.
120.00
M2
95.00
11,400.00
16
42.00
M2
415.00
17,430.00
17
MS Angle Purlin including Fabrication.
0.53
TON
35000.00
18,550.00
18
50.00
M2
280.00
14,000.00
19
3.00
NO
375.00
1,125.00
20A
10.00
RM
190.00
1,900.00
20B
5.00
RM
125.00
625.00
21
Supplying , fitting and fixing 150 mm dia (inner) UPVC best quality pipe water grade preferably (Lira/Aziz/National Polymer brand ) with all fittings and joints with high class solution and at the base and sides filling with best quality local sand all complete as per direction of the EIC.
5.00
RM
375.00
1,875.00
22
5.00
M2
1650.00
8,250.00
22A
Supplying , making , fitting and fixing of M.S door including mortice lock, door handle, painting all complete as per approved sample and direction of the EIC.
0.00
M2
3500.00
0.00
23
5.00
M2
3000.00
15,000.00
24A
Supplying , fitting and fixing of Aluminium swing doors with fixed partition as per U.S AAMA standard specification having 1.8 mm thick wall frame (size 101.6mm , 40 mm )1.8 mm thick shutter sides (size 50 mm , 40 mm ) , 0.49 mm thick door glass bit (size 16.54 mm , 14.49 mm ) , 2.5 mm thick closure section (size 101.6 mm , 40 mm) 2.3 mm to 4 mm thick handle (size 101.6 mm , 38.1 mm ) sections all aluminium members of pre approved manufacturer of powder coated white colour including all accessories , supplying and fitting 5 mm thick w hite clear glass with neoprene , sealent all complete as per direction of the EIC. Half plastic panel + half clear glass
0.00
M2
5500.00
0.00
24B
Supplying , fitting and fixing of Aluminium louver as per U.S AAMA standard specification having 1.2 mm thick outer bottom , top and sides (size 45 mm , 45 mm) all aluminum members of pre approved manufacturer of anodized silver colour including all accessories , supplying and fitting 5 mm thick white clear glass with neoprene , sealent all complete as per direction of the EIC.
0.00
M2
3300.00
0.00
24C
0.00
RM
35.00
0.00
24D
0.00
NO.
100.00
0.00
Total:
239,628.00